Troubleshoot The Ex4100 And Ex4100-F Components; Chassis Component Alarm Conditions On Ex4100 And Ex4100-F Switches - Juniper EX4100 Hardware Manual

Troubleshoot the EX4100 and EX4100-F
Components
IN THIS SECTION

Chassis Component Alarm Conditions on EX4100 and EX4100-F Switches | 201

Troubleshoot Temperature Alarms in EX Series Switches | 204
Chassis Component Alarm Conditions on EX4100 and EX4100-F
Switches
This topic describes the chassis component alarm conditions on EX4100 and EX4100-F switches.
Table 42 on page 201 lists the alarms that the chassis components can generate on EX4100 and
EX4100-F switches. The table lists the severity levels of these alarms and the actions that you can take
to respond to them.
Table 42: Chassis Component Alarm Conditions on EX4100 and EX4100-F Switches
Chassis Alarm Condition
Component
Power supply A power supply has
been removed from
the chassis.
A power supply
output has failed.
A power supply has
failed.
Alarm Severity Remedy
Minor Install a power supply in the empty slot.
Major Check the power supply output connection.
Major Replace the failed power supply.
201