Chassis Component Alarm Conditions On Ex2200 Switches - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Related
Documentation

Chassis Component Alarm Conditions on EX2200 Switches

166
The switch supports these alarms:
Chassis alarms indicate a failure on the switch or one of its components. Chassis alarms
are preset and cannot be modified.
System alarms indicate a missing rescue configuration. System alarms are preset and
cannot be modified, although you can configure them to appear automatically in the
J-Web interface display or the CLI display.
Alarm Severity Levels
Alarms on switches have two severity levels:
Major (red)—Indicates a critical situation on the switch that has resulted from one of
the following conditions. A red alarm condition requires immediate action.
One or more hardware components have failed.
One or more hardware components have exceeded temperature thresholds.
An alarm condition configured on an interface has triggered a critical warning.
Minor (yellow or amber)—Indicates a noncritical condition on the switch that, if left
unchecked, might cause an interruption in service or degradation in performance. A
yellow alarm condition requires monitoring or maintenance.
A missing rescue configuration generates a yellow system alarm.
Checking Active Alarms with the J-Web Interface on page 172
Dashboard for EX Series Switches on page 25
This topic describes the chassis component alarm conditions on EX2200 switches.
Table 52 on page 167 lists the alarm conditions on EX2200 switches, their severity levels,
and the actions you can take to respond to them.
Copyright © 2017, Juniper Networks, Inc.