Parts Inventory (Packing List) For An Ex8216 Switch; Table 87: Parts List For Different Ex8216 Switch Configurations - Juniper EX8216 Hardware Manual

EX8216 Switch Hardware Guide
Related
Documentation

Parts Inventory (Packing List) for an EX8216 Switch

Table 87: Parts List for Different EX8216 Switch Configurations

Component
Chassis, including the midplane, LCD
panel, and front-mounting brackets
Routing Engine (RE) modules
Switch Fabric (SF) modules
Power supplies
Power supply cords (AC only)
Fan tray
160
Packing a Line Card Used in an EX8200 Switch on page 295
Installing a Line Card in an EX8200 Switch on page 248
EX8208 Switch Hardware Overview
EX8216 Switch Hardware Overview on page 3
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping crate against the items on the packing list. The packing list specifies the part
number and description of each part in your order. The parts shipped depend on the
configuration you order. See
information.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper Networks customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see
http://www.juniper.net/support/requesting-support.html
NOTE: All line cards ordered are shipped separately. Line cards are not listed
on the switch's packing list.
NOTE: The base configuration is available only with AC power supplies. The
redundant configuration ships with either AC or DC power supplies.
Table 87 on page 160 lists the parts and their quantities in the packing list for a base
configuration switch and a redundant configuration switch.
Base Configuration Quantity
1
1
8
2 AC
2 (1 per AC power supply)
2
"EX8216 Switch Configurations" on page 9
Redundant Configuration Quantity
1
2
8
6 AC or 4 DC
6 (1 per AC power supply)
2
for more
.
Copyright © 2017, Juniper Networks, Inc.