Parts Inventory (Packing List) For An Ex3300 Switch; Table 27: Parts List For An Ex3300 Switch - Juniper EX3300 Series Complete Hardware Manual

Parts Inventory (Packing List) for an EX3300 Switch

Table 27: Parts List for an EX3300 Switch

Component
Switch with built-in power supply
AC power cord appropriate for your geographical location (only for AC switch models)
Power cord retainer clip (only for AC switch models)
Mounting brackets
Mounting screws to attach the mounting brackets to the switch chassis
Rubber feet
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 110
The EX3300 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1–800–638–8296. For international-dial or direct-dial options in countries without
toll-free numbers, see http://www.juniper.net/support/requesting-support.html
Table 27 on page 67 lists the parts and their quantities in the packing list.
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the chassis on a rack or a cabinet.
Unpacking an EX3300 Switch on page 66
EX3300 Switches Hardware Overview on page 3
Chapter 9: Installing the Switch
.
Quantity
1
1
1
2
8
4
1
1
1
1
67