Parts Inventory (Packing List) For An Ex2200 Switch; Table 31: Parts List For Ex2200 Switches - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Parts Inventory (Packing List) for an EX2200 Switch

Table 31: Parts List for EX2200 Switches

Component
Switch with built-in power supply
AC power cord appropriate for your geographical location (only for AC switch models)
Power cord retainer clip (only for AC switch models)
68
To unpack the switch:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box and verify the contents in it against the parts inventory on
4.
the label attached to the carton.
Pull out the packing material holding the switch in place.
5.
Verify the chassis components received against the packing list included with the
6.
switch. An inventory of parts provided with the switch is provided in
(Packing List) for an EX2200 Switch" on page
Save the shipping carton and packing materials in case you need to move or ship the
7.
switch later.
EX2200 switches are shipped in a cardboard carton, secured with foam packing material.
The carton also contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see
https://www.juniper.net/support/requesting-support.html
Table 31 on page 68 lists the parts and their quantities in the packing list.
"Parts Inventory
68.
.
Quantity
1
1
1
Copyright © 2018, Juniper Networks, Inc.