6.1 US - Basic Setup Parameters
US02
System Units
US03
Motor Type
US - Basic Setup Parameters
This parameter chooses to display the speed, accel, and torque units in either
Imperial or Metric format.
Settings:
m / sec
ft / min
Default = ft / min
This parameter chooses the motor type and gearing configuration of the
system.
Settings:
Induction Geared
Induction Gearless
PM synchronous Geared
PM synchronous Gearless
Default = Induction Geared
Changing to a new configuration will return the parameter values to de-
fault! If a new configuration is loaded, users must go through all start-up
steps before running the motor.
NUM
0
1
NUM
0
1
2
3
111