KEB COMBIVERT F5 Reference Manual page 228

LA - Analog I/O Parameters
LA36
Analog Output 2
Function
LA38
Analog Output 2 Gain
LA39
Analog Output 2 X
Offset
LA40
Analog Output 2 Y
Offset
LA50
Analog 1 Interface
Selection
LA60
Analog 2 Interface
Selection
228
Analog Output 2
Settings LA36-40 for Analog Output 2 correspond with terminal
i
ANOUT2.
Refer to parameter LA31 for description.
Refer to parameter LA33 for description.
Refer to parameter LA34 for description.
Refer to parameter LA35 for description.
This parameter allows for the selection of either a voltage or current input
signal to be used at the Analog 1 input.
This parameter allows for the selection of either a voltage or current input
signal to be used at the Analog 2 input.
LA 50 Analog 1 NUM LA 60 Analog 2 NUM
+/- 0 - 10V 0
+/- 0 - 20mA 1
+/- 4 - 20mA 2
Default (LA50) = +/- 0 - 10V (0)
Default (LA60) = +/- 0 - 10V (0)
+/- 0 - 10V 0
+/- 0 - 20mA 1
+/- 4 - 20mA 2