KEB COMBIVERT F5 Reference Manual page 71

UVW
Drive connection X3A
Female SUBD 15 HD
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Encoder Card Part Number: Housing Size ≤ E, 1MF5K8G-ZZ08. Housing Size ≥ G 2MF5K8G-ZZ08
• Max. Load capacity depending on Voltage Supply
• Max. Load capacity at +5.2V = 400 mA. The specified current is reduced by the current taken from
the second encoder interface X3B interface (see Section 3.3.9).
UVW - Encoder Connections
Pin No. Signal
1 A+
2 A-
3 B+
4 B-
5 N+
6 N-
7 U+
8 U-
9 V+
10 V-
11 W+
12 W-
13 5V
14 COM
15 -

ONLY when the inverter is switched off and the voltage supply is discon-
nected may the feedback connectors be removed or connected!
Technical Data
• Input resistance:
• Maximum input frequency:
• Encoder line number: 1...8192 inc
The following Sin/Cos encoders have been tested for use:
• Heidenhain ERN 423, 426
• Quantum Devices Q-Phase
However, this does not restrict the use of rotary encoder with the same
specifications as other manufacturers.
Description
Incremental encoder input track A
Differential signal to A+
Incremental encoder input track
Differential signal to B+
Input zero track (not evaluated)
Differential signal to N+ (not evaluated)
Block commutation track U
Differential signal to U+
Block commutation track
Differential signal to V+
Block commutation track
Differential signal to W+
Voltage output 5V
Reference potential for voltage supply
-
120 Ohm
200 kHz
71