Lo - Outputs Parameters - KEB COMBIVERT F5 Reference Manual

6.14 LO - Outputs Parameters

LO01
Output Inversion
LO05
Output Function O1
LO10
Output Function O2
LO15
Output Function RLY1
LO20
Output Function RLY2
Allows the logic of the digital and relay outputs to be inverted.
Setting Option:
None
/O1
/O2
/O1 + /O2
/RLY1
/RLY1 + /O1
/RLY1 + /O2
/RLY1 + /O1 + /O2
/RLY2
/RLY2 + /O1
/RLY2 + /O2
/RLY2 + /O1 + /O2
/RLY2 + /RLY1
/RLY1 + /RLY2 + /O1
/RLY1 + /RLY2 + /O2
/RLY1 + /RLY2 + /O1 + /O2
O1 corresponds to the digital output "O1" - See section 3.1.1 & 3.2.2.
This output is available to be programmed with the one of the following output
functions listed on the next page.
O2 corresponds to the digital output "O2" - See section 3.1.1 & 3.2.2.
This output is available to be programmed with the one of the following output
functions listed on the next page.
RLY1 corresponds to "Relay 1" - See section 3.1.1 & 3.2.2.
This output is available to be programmed with the one of the following output
functions listed on the next page
RLY2 corresponds to "Relay 2" - See section 3.1.1 & 3.2.2.
LO - Output Parameters
Default = None (0)
NUM
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
229