KEB COMBIVERT F5 Reference Manual page 241

FB10
DIN66019 Field Bus
Node ID
FB11
DIN66019 Field Bus
Baud Rate
FB12
DIN66019 Field Bus
Watchdog
FB - Field Bus Parameters
FB10-12: Serial Communication Setup
Node ID must be set to agree with Node ID used in serial communication
service structure (default = 1).
The serial communication baud rate corresponding to port X6C.
As a note, the LX12 Baud Rate corresponds to the (Combivis) diagnostics
port X6D.
Watchdog of serial communication between the LCD keypad operator serial
communications port, X6C, and controller.
Active only when Mode = Run (Home or Diagnostics Screen #6).
As a note, the LX09 Serial Comm. Watchdog Time corresponds to the
communication between the LCD keypad operator and the inverter control card.
241