4.7 Programming
Menu
i
The programming menu is where all manual parameter adjustments are
made and can be accessed at Home > Prog (F3).
The Parameter menu contains the following groups:
•
Operator System (OS)
•
Basic Setup (US)
•
Inputs (LI)
•
Motor Data (LM)
•
Encoder Data (LE)
•
Machine Data (LN)
•
Speed Profile (LS)
•
Tune Parameters (LL)
•
Control Setting (LC)
•
Timer Parameters (LT)
•
Positioning Parameters (LP)
•
Special Functions (LX)
•
Configuration Handling (CH)
•
Analog I/O (LA)
•
Outputs (LO)
•
Diagnostic Parameters (DG)
•
Field Bus Configuration (FB)
•
Terminal Slowdown (TS)
•
Debug Parameter Group (DB)
Complete parameter descriptions are listed in Section 6.
Not all parameters may be viewable and changeable, depending
on the password accessibility. Refer to Section 4.8.2 for additional
information on password access.
LCD Keypad
79