Appendix - KEB COMBIVERT F5 Reference Manual

Appendix

13. Appendix
Certification
CE Marking
The inverter or servo drive must not be started until it is determined that the installation complies with
the Machine directive (2006/42/EC) as well as the EMC-directive (2004/108/EC)(note EN 60204).
The frequency inverters and servo drives meet the requirements of the Low-Voltage Directive
2006/95/EC. They are subject to the harmonized standards of the series EN61800-5-1.
This is a product of limited availability in accordance with IEC 61800-3. This product may cause radio
interference in residential areas. In this case, the operator may need to take corresponding measures.
UL Marking
This device has been investigated by UL according to United States Standard UL508C, Third Edition
(Power Conversion Equipment) and to the Canadian Standard CSA C22.2 No.14-2010, 11th Edition
(Industrial Control Equipment).
346
CE marked frequency inverter and servo drives were developed and manufactured
to comply with the regulations of the Low-Voltage Directive 2006/95/EC.
Acceptance according to UL is marked at KEB inverters with the
adjacent logo on the type plate.