KEB COMBIVERT F5 Reference Manual page 34

Power Connections
Housing Size R
L1, L2, L3
+PA, -
+PA, PB
Terminal Tightening Torque:
Housing Size U
L1, L2, L3
+PA, -
+PA, PB
Terminal Tightening Torque:
Housing Size W - Refer to power stage manual, Material Number 00F50EB-KW00
34

Verify input voltage with name plate for proper connection 230V or 480V
Note always verify input voltage with name plate for proper connection
L1 L2 L3
3 phase supply voltage
DC supply connection
Connection for braking resistor
housings size <= 22: 53 inlb (6Nm)
housings size 23/24: 133inlbs (15Nm)
Ground nut on R housing: 89inlbs (10Nm)

Verify input voltage with name plate for proper connection 230V or 480V
Note always verify input voltage with name plate for proper connection
L1 L2 L3
3 phase supply voltage
DC supply connection
Connection for braking resistor
U housings size 23/24: 133inlbs (15Nm)
U housings sizes > 24: 221inlbs (25Nm)
Ground nut on U housing: 89inlbs (10Nm)
K1 K2 T1 T2
+PA - PB U
T1, T2 Connection for temperature sensor
K1,K2 Brake transistor monitor terminals
U, V, W Motor connection
Connection for earth ground M8 stud.
Note: Ground Stud and Nut shall be connected with UL
Listed Ring Connectors (ZMVV), rated suitable.
K1 K2 T1 T2
+PA - PB
U
T1, T2 Connection for temperature sensor
K1,K2 Brake transistor monitor terminals
U, V, W Motor connection
Connection for earth ground M8 stud.
Note: Ground Stud and Nut shall be connected with UL
Listed Ring Connectors (ZMVV), rated suitable.
V W
V W