Combivis; Software; Combivis 6 Xml File - KEB COMBIVERT F5 Reference Manual

10. Combivis

10.1 Software

i
10.1.2 Combivis 6 XML
File
Combivis is a computer program that can be used to connect with the drive.
The program can be used to set parameters in the drive, upload parameter
settings from the drive, download parameters to the drive, and take scope
traces of parameters for evaluation and diagnostics.
Combivis 6 software is available for download free of charge from the KEB
America elevator support page:
https://www.kebamerica.com/elevator-support
Combivis 6 supported operating systems.
• Windows 7 (32 and 64-bit)
• Windows 10 (32 and 64-bit)
Note: Combivis 6, v6.7 and greater is not compatible with Windows 7
The Combivis 6 software download is a full version and does not need
to be registered.
Combivis 6 uses an XML file to provide the corresponding parameter struc-
ture and text for the drive data to be viewed with Combivis. The drive and
keypad operator both have an XML file for different modes of operation.
Without the proper XML file, Combivis may not be able to connect with the
drive or display the correct parameter information. In addition, the XML file
may not necessarily be uploaded from the drive or keypad operator when
connecting to Combivis; in particular, the keypad operator XML file.
XML files are available upon request from KEB. The files can then be saved
to the directory C:\Program Files\KEB\Combivis_6\KEB\Parameter De-
scription.
Combivis
337