KEB COMBIVERT F5 Reference Manual page 163

LE35
Encoder 2 Output PPR
This parameter selects the output ppr for the encoder output channel X3B.
Function: Settings:
Channel 1 The increments of the encoder at Channel
Channel 2 This value has no function since there is no
Source
Actual
Value
Reserved
256
512
Actual
Value
1024
2048
Direct
2
Division
4
8
16
32
64
128
Default = Channel 1+256 inc + Direct (0)
LE - Encoder Parameters
Description:
1 (X3A) are output via encoder emulation at
Channel 2 (X3B).
When Source = Channel 1 is selected, the
emulated encoder output can be further
divided by the Division factor.
encoder interface with encoder emulation
available via Channel 1 (X3A).
The increments of the encoder, whether
measured or calculated (eg. LE08 Encoder
1 Scaling), are output via the emulation at
Channel 2 (X3B).
When Source = Actual Value, the increments
per revolution of the output emulation must
be selected from Actual Value.
-
The number of increments per revolution
which are output via encoder emulation at
Channel 2 (X3B) when Source = Actual
Value.
The increments of the encoder Channel 1
(X3A) are output directly at Channel 2 (X3B).
Always use this adjustment if Source = Actual
Value.
The increments of encoder Channel 1 (X3A)
can be divided and output via encoder
emulation at Channel 2 (X3B) by the selected
factor when Source = Channel 1.
NUM
0
1
2
3
0
4
8
12
0
16
32
48
64
80
96
112
163