Brake Release Confirmation Tests - KEB COMBIVERT F5 Reference Manual

12.3 Brake Release Confirmation Tests

Refer to the corresponding LI Digital Input parameter that is programmed for Brake Release Con-
firmation and LI20 Brake Switch Function.
Brake Release Confirmation Tests
Checking the
Brake Switch
Func on in idle
Remove 24V from the input
used as Brake 1 or 2 Release
Confirma on
Drive trips
Brake [1 or 2]
Switch Failure?
Yes
Replace the 24V input
Reset the error
Error is
reset?
Yes
Func on works as intended
No
Func on is not properly
working. Check se ngs and
No
connec ons.
343