The run profile is defined by jerks, acceleration, and deceleration.
i
Different run profiles are available based on selected speed and/or input
function (e.g. Emergency Profile). The speed profiles and corresponding
parameters are broken down into the following groups:
• High Speed/Correction Profile
(Earthquake, Emergency Generator,
• and Battery Operation Speed)
• One Floor Profile (Intermediate Speeds 1, 2)
• Emergency Profile (Intermediate Speed 3)
• ESD/ETS Profile
• Inspection Speed Profile
Each profile will have the following settings*:
Accel Jerk
Acceleration
Start Jerk
All speeds will use the LS43-45 deceleration and jerk settings for the
i
Final Stop portion of the profile.
LS - Speed Profile Parameters
Acceleration
Starting Jerk
Acceleration Jerk
Deceleration
Deceleration Jerk
Stopping Jerk
*ESD and ETS Profile will only have deceleration and deceleration jerk settings.
LS20-27
LS30-38
LS40-47
LS48-49
LS50-55
Decel Jerk
Deceleration
Stop Jerk
Final Stop
171