B External Connections; Mass Spectrometer: External Wiring And Vacuum Connections - Waters Vion IMS QTof Overview And Maintenance Manual

Hide thumbs Also See for Vion IMS QTof:
Table of Contents

Advertisement

B External Connections

This appendix describes the mass spectrometer's external connections.
Warning:
not attempt to lift the mass spectrometer. To move the instrument, contact Waters
Technical Service.
Notice:
• Contact Waters Technical Service before moving the instrument.
• If you must transport the instrument, or remove it from service, contact Waters
Technical Service for recommended cleaning, flushing, and packaging procedures.
B.1 Mass spectrometer: External wiring and vacuum
connections
The instrument's external connectors are shown below.
Requirement:
service engineers only; they must be kept in the "up" position at all times.
Figure B–1: Mass spectrometer external connectors
Shielded Ethernet
To avoid skeletal or muscle injury associated with lifting heavy objects, do
To avoid damaging the mass spectrometer, observe the following precautions:
The two switches above the roughing pump connector are for use by Waters
March 17, 2021, 715005046 Ver. 03
Page 179

Advertisement

Table of Contents
loading

Table of Contents