C External Connections; System Tubing Connections - Waters ACQUITY UPLC I-Class IVD System Manual

C
External Connections
A Waters technical service representative unpacks and installs your
ACQUITY UPLC I-Class IVD system modules.
Caution:
Technical Service (see
component or remove it from service, contact Waters Technical
Service for recommended cleaning, flushing, and packaging
procedures.
Warning:
modules without assistance.
Contents:
Topic
System tubing connections .............................................................. 69
External wiring connections............................................................ 71
Signal connections............................................................................ 73
Connecting to the electricity source ................................................ 78

System tubing connections

The system's external tubing connections for solvent flow and drainage are
shown below:
To avoid damaging system modules, Contact Waters
page iv). If you must transport a system
To avoid back injuries, do not attempt to lift the system
July 7, 2014, 715003736IVD Rev. C
Page
69