Table of Contents
Advertisement
Symbol
10kg
max
REF
Audience and purpose
This guide is for operators of varying levels of experience. It gives an overview of the device and
explains how to prepare it for operation, change its modes of operation, and maintain it.
Intended use of the Vion IMS QTof
Waters designed the Vion IMS QTof for use as a routine analytical tool to deliver authenticated
mass measurement. The Vion IMS QTof is for research and routine analysis only and is not for
use in diagnostic applications.
Calibrating
To calibrate LC systems, adopt acceptable calibration methods using at least five standards to
generate a standard curve. The concentration range for standards must include the entire range
of QC samples, typical specimens, and atypical specimens.
When calibrating mass spectrometers, consult the instrument's online Help system for calibration
instructions.
Definition
For compliance with the Waste Electrical and
Electronic Equipment Directive (WEEE)
2012/19/EU, contact Waters Corporation for the
correct disposal and recycling instructions
For indoor use only
No pushing
Indicates the maximum load you can place on
that item (for example, 10kg)
Serial number
Part number, catalog number
March 17, 2021, 715005046 Ver. 03
Page ix
Advertisement
Table of Contents
