Table of Contents
Advertisement
For reference flows for the LockSpray source or NanoLockSpray source, the Fluidics system
delivers lock mass solution from reservoir bottle B, or for extended operating hours, from a
separate, external bottle of lock mass solution.
Tip:
You can fit a 250-mL lock mass solution bottle to port B of the Fluidics system, to
accommodate longer operating hours without the need for external bottles. To prevent loss of
lock mass solution through evaporation, fit a bottle stopper to the 250-mL bottle.
1.3.1 Physical layout of the Fluidics system
The Fluidics system comprises the components shown in the following figure.
Figure 1–4: IntelliStart Fluidics system components
Reservoir bottle C (calibration)
LockSpray pump
Sample pump
Divert valve
Sample selector valve
Fluidics access door
LockSpray selector valve
Reservoir bottle A (sample)
March 17, 2021, 715005046 Ver. 03
Page 24
Advertisement
Table of Contents
