B External Connections - Waters Xevo TQD Overview And Maintenance Manual

B
External Connections
Warning:
heavy objects, use suitable machinery and the supplied harness to
lift the mass spectrometer.
Notice:
following precautions:
• Contact Waters Technical Service before moving it.
• If you must transport the instrument, or remove it from service,
See
Contents:
Topic
External wiring and vacuum connections ...................................... 218
Connecting the oil-filled roughing pump ........................................ 219
Connecting the Edwards oil-free roughing pump .......................... 224
Connecting to the nitrogen gas supply ........................................... 228
Connecting to the collision cell gas supply ..................................... 230
Connecting the nitrogen exhaust line............................................. 230
Connecting the liquid waste line..................................................... 233
Connecting the workstation ............................................................ 235
Connecting Ethernet cables............................................................. 236
I/O signal connectors........................................................................ 237
Connecting to the power supply ...................................................... 241
To avoid skeletal or muscle injury associated with lifting
To avoid damaging the mass spectrometer, observe the
contact Waters Technical Service for recommended cleaning,
flushing, and packaging procedures.
page 87.
March 14, 2014, 715004387 Rev. B
Page
217