Table of Contents
Advertisement
Warning:
enclosure open.
2. Pull the source enclosure release (located at the bottom, right-hand side) outward, and
swing open the enclosure.
3. Remove the blanking plug from the corona pin mounting contact.
Tip:
Store the blanking plug in a safe location.
Figure 5–3: Blanking plug fitted to the corona pin mounting contact
Corona pin mounting contact blanking plug
Warning:
sharp.
4. Fit the corona pin to its mounting contact, ensuring that the corona pin is securely mounted
and that its tip aligns with the sample-cone orifice.
Figure 5–4: Corona pin
Corona pin
5. Close the source enclosure.
To avoid burn injuries, take great care while working with the source
To avoid puncture wounds, handle the corona pin with care. Its tip is
March 17, 2021, 715005046 Ver. 03
Page 58
Advertisement
Table of Contents
