9. Dispose of the conductive liner tubing in accordance with local environmental regulations.
10. Loosen the lock nut at the base of the PEEK union using both the 7-mm and 8-mm
wrenches.
Figure 5–44: Loosening the lock nut
7-mm wrench
8-mm wrench
PEEK union
Lock nut
Slide port
Capillary
Note:
Use the 8-mm wrench to hold the PEEK union in place while you loosen the lock
nut using the 7-mm wrench.
11. Unscrew and remove the PEEK union from the slide port using both the 7-mm and 8-mm
wrenches.
March 17, 2021, 715005046 Ver. 03
Page 98