Waters Vion IMS QTof Overview And Maintenance Manual page 150

Table 5–3: Tubing dimensions (LockSpray system)
Port number Connection
1 Reservoir
bottle A
2 Reservoir
bottle B
3 Reservoir
bottle C
4 Reference
probe
(or Flow
sensor if fitted)
5 Waste
reservoir
6 Wash reservoir 0.020
7 LockSpray
selector pump
- Flow sensor to
grounded
union (if used)
- Grounded
union to
reference
probe
Required materials
• Chemical-resistant, powder-free gloves
• Protective eyewear
• The Vion IMS QTof Fluidics Tubing and Fitting Kit.
Tip:
This kit contains components for both the sample and LockSpray system plumbing.
• For the LockSpray reference probe connection,
• 375 mm of 0.005-inch ID red PEEK
• A long finger-tight fitting
To plumb the LockSpray system:
Warning:
To avoid eye injury from the PEEK tubing, use eye protection when
performing this procedure.
ID (inch) OD (inch)
0.020 1/16
0.020 1/16
0.020 1/16
0.005 1/32
0.040 1/16
1/16
0.010 1/16
0.005 1/32
Probe and flow rate dependent.
March 17, 2021, 715005046 Ver. 03
Page 150
Color Length (mm)
Orange 680
Orange 680
Orange 680
Red 200
Natural 1,000
Orange 1,000
Blue 300
Red 60