Figure 5–54: Securing the PEEK union
7-mm wrench
Lock nut
8-mm wrench
Probe inlet connector
Red PEEK tubing
PEEK union
Slide port
Capillary
14. Finger-tighten the lock nut onto the PEEK union, and then, using the 7- and 8-mm
wrenches, tighten by an additional quarter-turn.
15. Slide the new conductive liner tube and knurled nut onto the capillary, and then tighten the
knurled nut.
March 17, 2021, 715005046 Ver. 03
Page 105