Before Using the
Machine
1
Error Codes
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
If a job or operation does not complete successfully, check the error code, and perform the necessary operations according to the error code
displayed. You can check the error code on the Details screen when you press [Log] on the System Monitor screen. (See "Checking Device
Status," on p. 1-20.)
If a send, receive, or fax job does not complete successfully, the error code is printed in the Results column on the Activity Report and TX
Report. However, if a send job is canceled, "STOP" is printed in the Results column on the TX Report.
For details on reports, see "Printing Reports Automatically, " on p. 11-44.
See the following for individual error codes.
Back
Previous
Next
TOP
10-21