Canon imageCLASS MF7460 Reference Manual page 100

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Press [Done].
If you are placing originals with the same width, press [Same Width].
If you are placing originals with different widths, press [Different
Width].
7.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display. Press
original. When scanning is complete, press [Done].
– To cancel this setting, press [Special Features] → [Different Size
Originals] → [Cancel].
– To cancel all settings and return the machine to the Standard
mode, press (Reset).
■
This mode enables you to make copies of originals with a sharper or
softer contrast. To reproduce text or lines with a sharper contrast,
use [High] as the setting. To copy originals containing printed
images or other halftones with a softer contrast, use [Low] as the
setting.
(Start) once for each
Low
●
If you make copies of an original containing halftones, such as a
printed photograph, using the Photo mode, the moire effect (a
shimmering, wavy pattern) may occur. In this case, you can lessen
this moire effect by using [Low] as the setting to produce a clearer
copy.
The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together.
Back Previous
Sharpness
Original
Low Set
The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together.
TOP
Next
Copy
Low Not Set
The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together.
3-29