Canon imageCLASS MF7460 Reference Manual page 134

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Enter the e-mail address (up to 120 characters),
then press [OK].
You can also use - (numeric keys) to enter numbers, and
(Clear) to clear your entry.
Specifying an I-Fax Address
(imageCLASS MF7480 Only)
This mode enables you to specify a new I-fax address. Regardless of
the distance and area, I-fax helps you to reduce transmission costs
by making transactions via the Internet. You can enter an I-fax
address directly from the keyboard on the touch panel display. You
can also specify the scan settings and the settings at the destination
when using I-fax.
The following conditions are always selected:
- Paper Size: LTR
This is because the sender does not know whether the recipient's
machine can receive sizes other than LTR. Originals larger than LTR are
reduced to LTR size.
- File Format: TIFF
- Resolution: B&W 200 x 100 dpi or B&W 200 x 200 dpi
Back Previous
1.
Press (SEND).
2.
Place your originals.
3.
Make sure the machine is ready to send.
4.
Press [New Address].
5.
Press [I-Fax].
6.
Enter the I-fax address (up to 120 characters),
then press [OK].
You can also use - (numeric keys) to enter numbers, and
(Clear) to clear your entry.
TOP
Next
4-23