Canon imageCLASS MF7460 Reference Manual page 59

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
To prevent paper jams, do not use any of the following:
●
– Wrinkled or creased paper
–
Curled or rolled paper
– Coated paper
– Torn paper
– Damp paper
– Very thin paper
– Paper which has been printed on using a thermal transfer printer
(Do not copy on the reverse side.)
The following types of paper do not print well:
●
– Highly textured paper
– Very smooth paper
– Shiny paper
Make sure the paper is free from dust, lint, and oil stains.
●
Be sure to test paper before purchasing large quantities.
●
Store all paper wrapped and on a flat surface until ready for
●
use. Keep opened packs in their original packaging in a cool,
dry location.
Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative
●
humidity.
Use only the transparencies designed for laser printers.
●
Canon recommends you to use Canon type transparencies
with this machine.
Back Previous
Each paper drawer holds approximately 250 sheets of paper
●
(22 lb bond (80 g/m 2 )).
Note the following points when using the stack bypass:
●
– Paper Quantity: one to approximately 80 sheets (22 lb bond
2
(80 g/m ), stack approximately 3/8" (10 mm) high)
– Paper Size: 3 3/4" x 5 7/8" to 11 3/4" x 17" (95 mm x 148 mm to
297 mm x 432 mm)
– Paper Weight: 18 to 32 lb bond (64 to 128 g/m
– Paper which has been rolled or curled must be straightened
out prior to use, to allow the paper to feed smoothly
through the stack bypass (allowable curl amount: less than
3/8" (10 mm) for normal paper, less than 1/4" (5 mm) for
heavyweight paper). There are some types of paper stock
which may meet the above specifications, but cannot be fed
into the stack bypass.
You can select standard inch paper, or A or B series paper.
●
TOP
Next
2 )
2-11