Canon imageCLASS MF7460 Reference Manual page 244

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
14.
Enter the network domain name of the machine,
then press [OK].
If you set Use DHCPv6 to [On], the IPv6 address of a DNS server you
set manually will be overwritten.
15.
Press [OK].
16.
Press [DNS Dynamic Update Settings].
17.
Select [On] or [Off] for <DNS Dynamic Update
Settings>.
[Off ]: Does not use the DNS server dynamic update function. Skip to
step 20.
[On]: Enables you to automatically register the IPv6 address, host
name, and domain name set for the machine in the DNS server using
dynamic DNS updating if your environment includes a dynamic DNS
server. Proceed to step 18.
18.
Select [On] or [Off] for <Register Manual
Address>.
[On]: Registers a manual address in the DNS server using dynamic
DNS updating.
[Off ]: Does not register a manual address in the DNS server using
dynamic DNS updating.
Back Previous
19.
Select [On] or [Off] for <Register Stateful
Address>.
[On]: Registers a stateful address in the DNS server using dynamic
DNS updating.
[Off ]: Does not register a stateful address in the DNS server using
dynamic DNS updating.
Windows 2000 Server and Windows Server 2003 do not support
DHCPv6 servers.
20.
Press [OK].
21.
Press [Done] repeatedly until the Additional
Functions screen closes.
22.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
TOP
Next
6-43