Canon imageCLASS MF7460 Reference Manual page 208

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1.
Press (Additional Functions).
2.
Press [System Settings] → [Network Settings] →
[SNMP Settings].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press (Log In/Out) to enter the System Settings menu.
The SNMP Settings screen appears.
3.
Select [On] or [Off] for <Use SNMP>.
[On]: When you set or browse each item of the machine with utility
that uses SNMP to obtain information. Proceed to step 4.
[Off ]: When you do not use an SNMP utility. Skip to step 7.
4.
To change Community Name to a name other
than <public>, press [Community Name], then
enter the community name using the touch
panel keyboard.
5.
Select [On] or [Off] for <Writable SNMP>.
[On]: Allows the computers on the network to access the machine
and modify its settings.
[Off ]: The computers on the network cannot access the machine and
modify its settings.
6.
Select [On] or [Off] for <Get Printer
Management Information from Host>.
[On]: Enables the SNMP port monitoring function to automatically
obtain printer management information such as information on
print applications and printer ports if you are using Windows Vista
and set [Standard TCP/IP port] for the printer driver port.
[Off ]: Disables the above function.
7.
Confirm the settings you specified, then press
[OK].
8.
Press [Done] repeatedly until the Additional
Functions screen closes.
9.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
– (numeric
Dedicated Port (IPv4 Only)
To set or browse detailed information on the machine with a Canon
printer driver or utility, set Enable Dedicated Port to [On].
1.
Press
2.
Press [System Settings] → [Network Settings] →
[Enable Dedicated Port].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press
The Enable Dedicated Port screen appears.
3.
Select [On] or [Off].
[On]: Enables you to set or browse detailed information on the
machine with a Canon printer driver or utility.
[Off ]: Disables you to set or browse detailed information on the
machine with a Canon printer driver or utility.
4.
Press [OK].
5.
Press [Done] repeatedly until the Additional
Functions screen closes.
6.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
Back Previous Next
(Additional Functions).
(Log In/Out) to enter the System Settings menu.
TOP
– (numeric
6-7