Canceling Tx/Rx Jobs; Using The Touch Panel Display; Using The Stop Key; Using The System Monitor Screen - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1

Canceling TX/RX Jobs

Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can cancel a job using the touch panel display or System
Monitor screen, or by pressing (Stop).

Using the Touch Panel Display

■
You can cancel a send job by pressing [Cancel], while the job is
being scanned.
1.
Press [Cancel] on the pop-up screen that
appears while the machine is scanning.
2.
Remove your originals.

Using the Stop Key

■
You can cancel a send job by pressing
being scanned.
1.
Press (Stop).
2.
Remove your originals.
(Stop), while the job is
Back Previous

Using the System Monitor Screen

■
You can cancel a send job while it is being sent or waiting to be
sent, or a fax receive job while it is being received.
Fax
1.
Press [System Monitor] → [Fax].
2.
Select [TX Job Status] or [RX Job Status].
3.
Select the job that you want to cancel, then
press [Cancel].
The message <Is it OK to cancel?> appears on the touch panel
display.
– If the job that you want to cancel is not displayed, press [▼] or
[▲] to scroll to the desired job.
– You cannot select multiple jobs and cancel them all at once.
Select and cancel one job at a time.
– If a job is in the process of being sent, it may not be canceled
even if you press [Cancel].
– If you cancel a job during sequential broadcasting, all of the
destinations following the one to which the document is
currently being sent will be canceled.
– If you select a document that is being received, [Erase] changes
to [Cancel], enabling you to cancel receiving the document.
– You cannot erase a document that is being printed.
TOP
Next
4-75