Canon imageCLASS MF7460 Reference Manual page 420

Before Using the
Machine 1
System Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Communications Settings
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
1
* Indicates the item that appear only for the imageCLASS MF7480.
Table of Contents
Index
POP Server
POP Address
POP Password
POP Interval
Startup Time Settings
E-mail/I-Fax Settings* 1
Maximum TX Data Size
Divided TX over Max.Data Size
Default Subject
Fax Settings
Send Start Speed
Receive Start Speed
Enters the POP server IP address or name (max. 48 characters).
Enters the login name for access to the POP server (max. 32 characters).
Enters the password for access to the POP server (max. 32 characters).
Sets the interval you want the POP server to check for incoming e-mail. If the interval is set to 0,
the POP server is not checked automatically. (1-99)
Sets the time period required to delay the startup of network communications for the machine
(0-300sec).
Sets the fax and e-mail/I-fax communication.
Sets the e-mail/I-fax communications.
Sets the maximum data size for outgoing e-mail messages and I-fax documents. If the e-mail
message send job exceeds this data size limit, it is split up into several e-mail messages before
being sent. However, if an I-fax transmission exceeds the data size limit, it is handled as an error,
and it is not sent.
(0MB-99MB)
Sets whether to divide a document into separate files when it is sent if its size exceeds the data
size you specify.
– Off
– On
The subject that you enter here is used as the default subject whenever you do not enter a
subject when sending a job.
Sets the facsimile communication.
Sets the transmission start speed for faxes. (33600bps, 14400bps, 9600bps, 7200bps, 4800bps,
2400bps)
Sets the reception start speed for faxes. (33600bps, 14400bps, 9600bps, 7200bps, 4800bps,
2400bps)
Back Previous Next
TOP
11-37