Customizing Sending Features; Setting Automatic Redialing (Fax); File Server) (Imageclass Mf7480 Only) - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1

Customizing Sending Features

Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Setting Number of Retry Attempts (E-Mail/
■
I-Fax/File Server) (imageCLASS MF7480
Only)
You can set how many times the machine automatically resends
data when the data cannot be sent because the receiver is busy
sending or receiving, or when an error occurs.
1.
Press (Additional Functions).
2.
Press [Communications Settings] → [TX
Settings] under <Common Settings> → [Retry
Times].
The Retry Times screen appears.
3.
Press [-] or [+] to set the number of Retry Times,
then press [OK].
– You can also use – (numeric keys), and
your entries.
– You can change the value by pressing [-] or [+], even if you have
entered the value using – (numeric keys).
– If the number of retry times is set to <0>, the machine will not
resend the data.
– If you enter a value outside the setting range, a message
prompting you to enter an appropriate value appears on the
screen.
4.
Press [Done] repeatedly until the Send Basic
Features screen appears.

Setting Automatic Redialing (Fax)

■
Automatic redialing enables the machine to automatically redial the
recipient's fax number if the recipient cannot be reached due to a
busy line, or if a sending error occurs. Auto Redial can be turned
[On] or [Off ]. If you set Auto Redial to [On], you can set how many
times the machine redials the number, and the redial interval.
1.
2.
3.
(Clear) to clear
4.
Back Previous
Press (Additional Functions).
Press [Communications Settings] → [TX
Settings] under <Fax Settings> → [Auto Redial].
The Auto Redial screen appears.
Select [On] or [Off].
If you select [On]:
●
– Press [Option].
– Press [Redial Times].
– Press [-] or [+] to set the number of redial times, then press [OK].
The machine can redial from 1 to 10 times.
– Press [Redial Interval].
– Press [-] or [+] to set the redial interval, then press [OK].
The redial interval can be set from 2 to 99 minutes in one-minute
increments.
– Press [TX Error Redial].
– Select [On] or [Off ], then press [OK].
If you select [Off]:
●
– Press [OK].
Press [Done] repeatedly until the Send Basic
Features screen appears.
TOP
Next
4-39