Glossary - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1

Glossary

Original and Paper
2
Numeric
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
A
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
10Base-T
The Ethernet standard supporting data transfer rates a maximum of
10 Mbps, which utilizes a twisted-pair cable.
100B-TX
The Ethernet standard supporting data transfer rates a maximum of
100 Mbps, which utilizes two pairs of high grade twisted-pair cables.
Activity Report
A journal of the machine's transactions, both sent and received.
Address Book
The Address Book is a feature used for storing fax, e-mail, I-fax,
and file server destinations. The Address Book is divided into an
Address Book and one-touch buttons. Registering a destination in
the Address Book saves you the effort of entering that destination's
address each time you send a job.
ASCII code
ASCII (American Standard Code for Information Interchange) is
a set of standardized codes used to represent letters, numbers,
punctuation marks, a few symbols, and control characters. A seven
digit (or seven bit) binary number can represent one of 128 distinct
codes.
Automatic redialing
When the recipient's machine is busy or does not answer, or when an
error occurs while sending, the machine waits a specified time and
then automatically redials the number. If the receiving fax is still busy
or does not answer, the machine waits the specified time and dials
again.
Back Previous
B
BOOTP
BOOTstrap Protocol. A protocol that enables a client machine to
automatically obtain network setup information from a server over a
TCP/IP network. BOOTP enables a client to automatically locate such
information as the host name, domain name, and IP address, so that
it is not necessary to enter these items manually.
bps
Bits per second. The measure of transmission speed used in
relationship to networks and communication lines.
Broadcasting
Transmitting documents to more than one location (through the
machine's memory).
Buffer size
The size of a data area, or buffer, shared by devices or programs
working at different speeds or with different priorities. The buffer is
designed to prevent one device or process from being held up by
another. For this to be possible, the buffer must be set up correctly.
C
CCITT/ITU-T
A committee that sets international standards for
telecommunications. CCITT/ITU-T was formerly known as CCITT
(Consultative Committee for International Telegraph and Telephone),
but is now succeeded by ITU-T (International Telecommunications
Union-Telecommunications Sector).
Community Name
An identification keyword for SNMP (Simple Network Management
Protocol).
TOP
Next
11-84