Before Using the
Machine
1
Detecting and Installing Drivers that Support Functions
Original and Paper
2
Specified on the Machine into Your Computer
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
From the machine, you can specify functions suitable for the
fax board or printer kit installed in the machine. From your
computer, you can detect and install drivers that are
compatible with the specified functions.
If the desired driver is not in your computer, detection and installation
cannot be performed.
1.
Press
(Additional Functions).
2.
Press [System Settings] → [
Selection (PnP)].
The PDL Selection (PnP) screen appears.
3.
Select the button for the function that is
applicable to Plug and Play settings, then press
[OK].
4.
Press [Done] repeatedly until the Basic Features
screen appears.
] → [
] → [PDL
▼
▼
Back
Previous
Next
TOP
8-23