Canon imageCLASS MF7460 Reference Manual page 369

Before Using the
Machine 1
You cannot get documents from information services.
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Errors occur frequently while receiving.
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Cannot print received documents on both sides of the paper.
Table of Contents
Index
Q Is your machine set to the tone dialing type of the
telephone line?
A Press [Tone] to set the tone dialing.
Q Do you receive messages from the information
services such as to press
receive?
A When you hear the beep sound, press
Q Are the telephone lines in poor condition, or do
you have a bad connection?
A Check if there is a device nearby that interferes with
signal reception (e.g., microwave oven).
A Lower the reception speed. (See "Fax Settings, " on
p. 11-37.)
Q Is the sender's machine functioning properly?
A Ask the sender to check that the machine is
functioning properly.
Q Is 2-Sided Print set to [On]?
A Make sure that 2-Sided Print is set to [On]. (See "Two-
Sided Printing, " on p. 4-71.)
(Start) after the beep to
(Start).
Back Previous Next
TOP
10-39