Canon imageCLASS MF7460 Reference Manual page 313

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
10.
Close the feeder.
Be careful not to get your fingers caught.
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning
them through the feeder, clean the rollers of the feeder by
repeatedly feeding blank sheets of paper through it.
It takes approximately 20 seconds to clean the feeder.
1.
Press (Additional Functions).
2.
Press [Adjustment/Cleaning].
3.
Press [Feeder Cleaning].
Back Previous
4.
Place 10 sheets of blank LTR paper into the
feeder, then press [OK].
While the feeder is being cleaned, the screen below appears.
5.
Press [Done] repeatedly until the Basic Features
screen appears.
Transfer Roller
If the backside of the printed paper is smudged, the transcription
roller in the main unit may be dirty. Should this occur, use the
Transfer Roller Cleaning function to clean the transcription roller.
1.
Press (Additional Functions).
2.
Press [Adjustment/Cleaning].
3.
Press [Transfer Roller Cleaning].
TOP
Next
9-8