Two-Sided Copying - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1
Copy is skewed.
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Copy is not clear.
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the paper loaded correctly?
A Make sure the paper is correctly loaded in the
machine. For details on how to load paper in the
paper drawer, see "Set Up the Machine, " in the Starter
Guide. For details on how to load paper the stack
bypass, see "Loading Paper, " on p. 2-13.
A Make sure the paper delivery slot is free of
obstructions.
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-10.)
Q Are you copying on the wrong side of the paper?
A Some papers have a "right" side for copying. If the
copy quality is not as clear as you think it should be,
try copying on the other side of the paper.
Back
Originals are copied in <Calendar Type> even if <Book Type> is
selected (or vice versa).
Q Are you copying the landscape oriented
documents?
A For the landscape oriented documents, the front and
back sides of the copy will have the opposite top-
bottom orientation when <Book Type> is selected.
When <Calendar Type> is selected, the front and back
side of the copy will have the same top-bottom
orientation. (See "Two-Sided Copying, " on p. 3-17.)
TOP
Previous Next
10-41