Canon imageCLASS MF7460 Reference Manual page 356

Before Using the
Machine 1
#0808 (for the imageCLASS MF7480 only)
Original and Paper
Description
2
Copying
Action
3
Sending and Description
Receiving 4
Printing and
Action
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
#0810 (for the imageCLASS MF7480 only)
Remote UI (imageCLASS
Description
MF7480/MF7470 Only) 7
System Settings
Description
8
Maintenance
Description
9
Action
Troubleshooting
10
Appendix
11
#0812 (for the imageCLASS MF7480 only)
Description
Action
Table of Contents
Index
A timeout error occurred while the machine was
communicating with the FTP server.
Check that the FTP server is functioning normally,
or check the network status.
The FTP server returned an error while trying to
connect. The destination is not correct. An error
occurred on the server side during transmission.
Check that the FTP server is functioning normally.
Check the network status. Check the destination
setting. Check the status and setting of the file
server.
A POP server connection error occurred when
receiving an I-fax.
The POP server returned an error during the
connection.
A timeout error occurred on the server while
connecting to the POP server.
Check the POP Server name in E-mail/I-Fax in
Network Settings in System Settings (from the
Additional Functions screen). Confirm that the
POP server is functioning normally. Check the
network status.
The POP password setting is incorrect.
Check the POP Server password in E-mail/I-Fax in
Network Settings in System Settings (from the
Additional Functions screen).
Back
#0813 (for the imageCLASS MF7480 only)
Description The POP Server name setting is incorrect.
Action Check the POP Server name in E-mail/I-Fax in
Network Settings in System Settings (from the
Additional Functions screen).
#0816
Description You have reached the quota for the number of
pages you can copy or print.
Action Reset or increase the page quota or contact your
system administrator.
#0818 (for the imageCLASS MF7480 only)
Description You have received data that cannot be processed
(cannot print the attached file).
Action Check the settings and ask the sender to resend
the data.
#0819 (for the imageCLASS MF7480 only)
Description You have received data that cannot be processed
(MIME information is incorrect).
Action Check the settings, and then ask the sender to
resend the data.
#0820 (for the imageCLASS MF7480 only)
Description You have received data that cannot be processed
(BASE 64 or uuencode is incorrect).
Action Check the settings, and then ask the sender to
resend the data.
TOP
Previous Next
10-26