Printing And Scanning; Network (Imageclass Mf7480/Mf7470 Only) 6; Original And Paper 2; Machine - Canon imageCLASS MF7460 Reference Manual

Before Using the

Machine

1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Registering/Editing File Server Addresses
1.
Press (Additional Functions).
2.
Press [Address Book Settings] → [One-touch
Buttons].
If a password has been set for the Address Book, enter the password
using – (numeric keys), then press [OK] to enter the Address
Book Settings menu. (See "Setting a Password for the Address Book, "
on p. 8-16.)
The Register One-touch Button screen appears.
3.
Select a one-touch button to store or change,
then press [Register/Edit].
– If the desired one-touch button is not displayed, press [▼] or [▲]
to scroll to the desired one-touch button.
– You can also specify the one-touch button's number by entering
the three digit number of the desired one-touch button using
– (numeric keys).
– One-touch buttons that already have destinations stored in them
are displayed with a black square (■) in the lower right corner of
the key.
– If you select a one-touch button that already has destinations
stored in it, the destinations are displayed.
– If you register multiple destinations as a group address in a one-
touch button, the number of destinations registered in the group
address is displayed.
4.
Press [File].
If you select a one-touch button already storing a destination, skip
this step.
Back Previous
5.
Press the Protocol drop-down list, then select
the desired protocol.
[FTP]: Select this protocol if you are sending documents to a
computer running Sun Solaris 2.6 or later, Mac OS X, Internet
Information Services 5.0 under Windows 2000 Server, Internet
Information Services 5.1 under Windows XP Professional, Internet
Information Services 6.0 under Windows 2003 Server, Internet
Information Services 7.0 under Windows Vista, or Red Hat Linux 7.2.
[Windows (SMB)]: Select this protocol if you are sending documents
to a computer running UNIX/Linux (Samba 2.2.8a or later) or
Windows 98/Me/2000/XP/Server 2003/Vista.
6.
Set [Host Name], [File Path], [User], and
[Password].
For instructions on specifying each of the settings for FTP and
Windows (SMB), see "Specifying a File Server (imageCLASS MF7480
Only) , " on p. 4-24.
7.
Press [Next].
8.
Enter a name for file server address (up to 16
characters), then press [OK].
The first character that you enter for the name is used for sorting the
address list when you press keys, such as [ABC] and [DEF], on the
Address Book screen.
TOP
Next
4-56