Canon imageCLASS MF7460 Reference Manual page 109

Before Using the
Machine 1
Canceling Copy Jobs
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can cancel a job using the touch panel display or System
Monitor screen, or by pressing (Stop).
Using the Touch Panel Display
■
You can cancel a copy job by pressing [Cancel], while the job is
being copy.
1.
Press [Cancel] on the pop-up screen that
appears while the machine is scanning, printing,
or waiting to print.
If you cancel a copy job during scanning, make sure to remove the
original for that job.
Using the System Monitor Screen
■
You can cancel a copy job while it is waiting to be processed or
during printing.
1.
Press [System Monitor].
2.
Press [Copy].
3.
Press [Status].
Back Previous
4.
Select the copy job that you want to cancel, then
press [Cancel].
– If the job that you want to cancel is not displayed, press [▼] or
[▲] to scroll to the desired job.
– You cannot select multiple jobs and cancel them all at once. You
may only select and cancel one job at a time.
5.
Press [Yes].
The message <Canceling...> appears for approximately two seconds
on the touch panel display.
The canceled job is displayed as <NG> (No Good) on the Log screen.
6.
Press [Done].
TOP
Next
3-38