Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Changing the Password and Page Limit
■
You can change the password and page limit settings that you have
registered.
1.
Press
(Additional Functions).
2.
Press [System Settings] → [Department ID
Management].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press
(Log In/Out) to enter the System Settings menu.
The Department ID Management screen appears.
3.
Press [On].
4.
Press [Register ID/Password].
5.
Press [▼] or [▲] to display the Department ID
whose password and page limit you want to
change, then select the Department ID and
press [Edit].
Pressing and holding [▼] or [▲] enables you to quickly scroll
through the available Department ID pages.
6.
Enter the new password using
keys)
–
(numeric
You cannot change the Department ID.
7.
Press [Turn Limits On/Off and Set Page Limits].
8.
Press [On] under the desired function(s).
Back
Previous
Next
–
(numeric
TOP
8-8