Canon imageCLASS MF7460 Reference Manual page 34

Before Using the
Machine 1
Control Panel
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
A COPY key
Press to use the Copy function. The Copy Basic Features
screen appears on the touch panel display.
B SEND key
Press to use the Send/Fax function. The Send Basic Features
screen appears on the touch panel display. The Send
function is available only for the imageCLASS MF7480.
C SCAN key (imageCLASS MF7480/MF7470 Only)
Press to enable the Network Scan function. (See the Color
Network ScanGear User's Guide.)
D Reset key
Press to restore the standard settings of the machine.
E Numeric keys
Press to enter numerical values.
F Control Panel Power Switch (Sub Power Supply)
Press to turn the control panel on or off. When the control
panel is turned off, the machine is in the Sleep mode.
Back Previous
G Serial No. key
Press to display the serial number on the touch panel display.
H Stop key
Press to stop a job in progress, such as a scan, copy, or fax job
(scanning only).
I Start key
Press to start an operation.
J Main Power Indicator
Lights when the main power is turned on.
K Clear key
Press to clear entered values or characters.
L Error Indicator
Flashes or lights if there is an error in the machine. When the
Error indicator flashes, follow the instructions that appear on
the touch panel display. When the Error indicator maintains a
steady red light, contact Canon Authorized Service Facilities
or the Canon Customer Care Center.
TOP
Next
1-6