Before Using the
Machine
1
Canceling Print and Scan Jobs
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Cancel an ongoing job as follows.
Canceling Print Jobs
■
You can cancel a print job while it is being print.
1.
Press [System Monitor].
2.
Press [Print].
3.
Press [Status].
4.
Select the job you want to cancel, then press
[Cancel].
If the job that you want to cancel is not displayed, press [▼] or [▲]
to scroll to the desired job.
You cannot select multiple jobs and cancel them all at once. You may
only select and cancel one job at a time.
5.
Press [Yes].
The message <Canceling...> appears for approximately two seconds
on the touch panel display.
The canceled job is displayed as <NG> (No Good) on the Log screen.
6.
Press [Done].
Back
Previous
Canceling Scan Jobs
■
During scanning, a dialog box showing the scanning progress
appears.
1.
Click the [Cancel] button in that dialog box.
TOP
Next
5-6