Canon imageCLASS MF7460 Reference Manual page 221

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
4.
Create a shared folder to which files are to be
sent.
Sample setting:
Create a folder named "iR_Folder" in the [Public] folder in the [Home]
folder.
5.
Grant access to the shared folder created in step
4.
– Click to select the shared folder → select [Show Info] from the
[File] menu.
– Select [Privileges] from [Show].
– Enable read & write access to the folder by the owner and
members of a group to which the owner belongs.
– Close the [Info] window.
6.
Set a recipient address using the control panel.
Sample destination setting:
●
– Server side settings (set using the above procedure):
Create a folder named "iR_Folder" in the [Public] folder in the
[Home] folder of the user named "yoko, " then specify the iR_
Folder as the folder to which files are sent.
– The machine's destination settings:
The Protocol drop-down list:FTP
[Host Name]: IP address of Macintosh
[User]: User name entered in step 3
[Password]: Password for the above user
[File Path]: Enter one of the following:
Public/iR_Folder (If you enter a relative path)
Users/yoko/Public/iR_Folder (If you enter an absolute path)
Back Previous
– A maximum of 120 alphanumeric characters can be entered for
[File Path] on the control panel.
– If you switch the language of the touch panel display, [Host
Name] and [File Path] may not be displayed correctly.
FTP Server for imageWARE Gateway
– An FTP server for imageWARE Gateway is required for receiving data from
the machine, when used with imageWARE Gateway.
– If you are sending to an imageWARE Document Manager folder, set FTP
Extension to [On].
1.
Set up the FTP server for imageWARE Gateway.
For details about the settings, see the imageWARE Gateway Users
Guide.
2.
On the FTP server for imageWARE Gateway,
specify the folder to store data sent from the
machine.
For details about the settings, see the imageWARE Gateway Users
Guide.
– A maximum of 128 alphanumeric characters can be entered for a
folder name.
– Enter a user name and a password not longer than 24
alphanumeric characters.
TOP
Next
6-20