Canon imageCLASS MF7460 Reference Manual page 117

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Enter the name of the document that you want
to send (up to 24 characters), then press [OK].
– You can also use – (numeric keys) to enter numbers, and
(Clear) to clear your entry.
– When you are sending documents, each page is sent as a
separate image attached to an e-mail message, and the
extension of the document matches the file format that you
select for sending. The file name prefix of the image attached to
the e-mail message is assigned as follows:
– If you set the document's name:
The file name prefix is generated by the document's name,
transaction number, and four digits that signify the page
number of the image.
Example: document name_1004_0001.tif
– If you do not set the document's name:
The file name prefix is generated by the transaction number
and four digits that signify the page number of the image.
Example: 1004_0001.tif
– If you set the file format to [TIFF], [PDF], or [PDF (Compact)] while
both Divide into Pages and Divided TX over Max.Data Size are set
to [Off ], the four-digit number which indicates the page number
is fixed to <0001>.
7.
Press [Subject].
Back Previous
8.
Enter the subject of the e-mail message (up to
40 characters), then press [OK].
– You can also use – (numeric keys) to enter numbers, and
(Clear) to clear your entry.
– If you do not enter a subject, the default subject set in E-mail/I-
Fax Settings is used. (See "E-mail/I-Fax Settings, " on p. 11-37.)
9.
Press [Message].
10.
Enter the message body text (up to 140
characters), then press [OK].
– A hard return is counted as one character.
– You can also use – (numeric keys) to enter numbers, and
(Clear) to clear your entry.
11.
Press [▼].
TOP
Next
4-6