Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Press [Yes].
The screen below is displayed while the machine is printing the
counter information.
–
To cancel printing, press [Cancel].
–
To close the screen that is displayed while the machine is printing
the Page Count List, press [Done].
–
The counter information can be printed only if 11" x 17", LGL,
LTR, or LTRR (plain, recycled, or color paper) is loaded in a paper
source that is set to [On] when you press [Other] to select a paper
source in Drawer Eligibility For APS/ADS in Common Settings
(from the Additional Functions screen). (See "Automatic Paper
Selection/Automatic Drawer Switching, " on p. 2-21.)
7.
Press [Done].
8.
Press [OK].
Back
Previous
Accepting Print and Scan Jobs with
■
Unknown IDs
You can specify whether to accept or reject print and network scan
jobs from computers that do not correspond with a registered
Department ID.
1.
Press
(Additional Functions).
2.
Press [System Settings] → [Department ID
Management].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press
(Log In/Out) to enter the System Settings menu.
The Department ID Management screen appears.
3.
Press [On].
4.
Select [On] or [Off] for <Allow ID Unknown
Printer Jobs>.
[On]: The machine accepts print jobs from computers that do not
correspond with a registered Department ID.
[Off ]: The machine does not accept print jobs from computers that
do not correspond with a registered Department ID, and you must
enter a Department ID.
TOP
Next
–
(numeric
8-12