Canon imageCLASS MF7460 Reference Manual page 228

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
For Windows Server 2003:
●
– Click [Start] on the Windows taskbar → [Control Panel] →
[Network Connections] → Right-click the [Local Area Connection]
icon → click [Properties] to open the [Local Area Connection
Properties] dialog box.
– Confirm that [Client for Microsoft Networks], [File and Printer
Sharing for Microsoft Networks], and [Internet Protocol (TCP/IP)]
are all selected. If any of these functions is not selected, select it
now.
Back Previous
3.
Specify the NetBIOS settings.
For Windows Vista:
●
– Double-click [Internet Protocol Version 4 (TCP/IPv4)] to open the
[Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box →
in the [General] sheet, click [Advanced].
– In the [Advanced TCP/IP Settings] dialog box, click the [WINS] tab
→ in the [WINS] sheet, click [Enable NetBIOS over TCP/IP].
– Click [OK] until all the dialog boxes are closed.
– Restart the computer if prompted.
For Windows 2000/XP/Server 2003:
●
– Double-click [Internet Protocol (TCP/IP)] to open the [Internet
Protocol (TCP/IP) Properties] dialog box → in the [General] sheet,
click [Advanced].
– In the [Advanced TCP/IP Settings] dialog box, click the [WINS] tab
→ in the [WINS] sheet, click [Enable NetBIOS over TCP/IP].
– Click [OK] until all the dialog boxes are closed.
– Restart the computer if prompted.
TOP
Next
6-27